Support Unit FK fixed-side reund type

Short Description:

  • FOB Price: US $0.5 - 9,999 / Piece
  • Min.Order Quantity: 100 Piece/Pieces
  • Supply Ability: 10000 Piece/Pieces per Month
  • Port: Shenzhen
  • Type: Bearing seat
  • Material: 45 # Steel
  • Accuracy: C7, C5
  • Payment Terms: L/C,D/A,D/P,T/T
  • Models: FK6-C7     FK10-C7
    FK8-C7     FK12-C7
    FK15-C7   FK20-C7
    FK25-C7

  • Product Detail

    Product Tags

    Model No. Shaft diameterd L H F E D A P.C.D. B L1 T1 d1 d2 i M T
    FK6 6 20 7 13 22.5 22 36 28 28 6 3.5 3.4 6.5 4 M6X0.75 12 10
    35 2.9 5.5 3.5 12 -
    FK8 8 23 9 14 26 28 43 35 35 7 4 3.4 6.5 4 M8X1.0 14 10
    11.5
    FK10 10 29 13 16 29.5 34 52 42 42 5.5 5 4.5 8 6 M10X1.0 17 12
    14
    FK12 12 29 13 16 29.5 36 54 44 44 5.5 5 4.5 8 6 M12X1.0 19 15
    FK15 15 32 15 17 38 40 63 50 52 12 6 5.5 9.5 6 M15X1.0 22 20
    FK20 20 52 22 30 52 57 85 70 68 10 10 6.6 11 10 M20X1.0 30 25
    FK25 25 57 27 30 59 63 98 80 79 12 10 9 15 13 M25X1.5 35 31

    Type: Bearing seat
    Material: 45 # Steel
    Accuracy: C7

    xin

    Structure and Features

    The Support Unit comes in six types: models EK, FK, EF, and FF, which are standardized for
    standard-stock Ball Screws provided with finished shaft ends, and models BK and BF, which
    are standardized for ball screws in general.

    The Support Unit on the fixed side contains a JIS Class 5-compliant angular bearing provided with
    an adjusted preload. The miniature type Support Unit models EK/FK 4, 5, 6 and 8, in particular,
    incorporate a miniature bearing with a contact angle of 45゜developed exclusively for miniature
    Ball Screws. This provides stable rotation performance with high rigidity and accuracy.
    The Support Unit on the supported side uses a deep-groove ball bearing.
    The internal bearings of Support Unit models EK, FK and BK contain an appropriate amount of
    lithium soap-group grease that is sealed with a special seal. Thus, these models are capable of
    operating over a long period.

    ●Uses the Optimal Bearing
    To ensure rigidity balance with the Ball Screw, the Support Unit uses an angular bearing (contact angle: 30゜; DF configuration) with high rigidity and low torque. Miniature Support Unit
    models EK/FK 4, 5, 6 and 8 are incorporated with a miniature angular bearing with a contact
    angle of 45゜developed exclusively for miniature Ball Screws. This bearing has a greater contact angle of 45゜and an increased number of balls with a smaller diameter. The high rigidity
    and accuracy of the miniature angular bearing provides stable rotation performance.

    ●Support Unit Shapes
    Square and round shapes are available for the Support Unit to allow selection according to the
    intended use.

    ●Compact and Easy Installation
    The Support Unit is compactly designed to accommodate the space in the installation site. As
    the bearing is provided with an appropriately adjusted preload, the Support Unit can be assembled with a Ball Screw unit with no further machining. Accordingly, the required man-hours in
    assembly can be reduced and the assembly accuracy can be increased.

    ●Compact and Easy Installation
    The Support Unit is compactly designed to accommodate the space in the installation site. As
    the bearing is provided with an appropriately adjusted preload, the Support Unit can be assembled with a Ball Screw unit with no further machining. Accordingly, the required man-hours in
    assembly can be reduced and the assembly accuracy can be increased.


  • Previous:
  • Next: